How to Fix a Computer that Won't Boot Up (DELL Tech Support)

1. Verify the Computer Finishes Initial Power-Up (POST)

In many cases, a computer will not attempt to hand off control to the operating system. If you power the computer on and you see a Dell logo screen with a bar at the bottom, and that bar fills up completely and disappears, then your computer has successfully completed POST.

2. Unplug All External Devices

A piece of hardware may be interfering with the normal boot process of Windows. Try unplugging all devices from your computer, including:

• Printers
• Scanners
• Media Card Readers
• Small Media cradles (iPod, PDA, MP3 player, etc.)
• Digital Cameras and Video Recorders
• USB storage devices
• CDs or DVDs from all optical drives
• Docking station

The only devices you should leave attached to your computer are your monitor, mouse and keyboard if the computer is a desktop.

Once this is completed, unplug the computer from the wall, remove the laptop battery (if applicable) and hold the power button down for approximately 15 seconds. Then plug wall power back into the computer and attempt to restart.

3. Check for Specific Error Messages

Dell has information on some specific error messages at startup. Refer to the following links for more information:

• Loading PBR for Descriptor generated after POST
• A BLUE SCREEN or STOP error has occurred

If the error message is not listed above, try searching for additional solutions on the Web.
Click on your preferred search engine below, then describe your problem in the search box provided.

4. Reset the BIOS to Default Values

If your computer is set to first attempt to boot to another device, this may cause issues with successfully booting to Windows. To reset your computer's BIOS to factory defaults, perform the following steps:

1. Restart the computer.
2. At the Dell logo during restart, tap the F2 key repeatedly until you see Entering Setup in the top right corner of the screen.
3. Depending on the BIOS, you may need to press a key listed at the bottom of the screen to load default settings. For example, F9 on the Inspiron N5110.
4. Press ESC to exit the BIOS, and be sure to select Save and Exit to save your changes.

5. Boot to the Hard Drive Using the One-Time Boot Menu

Restart the computer, and at the Dell logo screen tap the <F12> key multiple times to invoke the One-Time Boot Menu. Select the Boot from Hard Drive option and press Enter.

IF you have to follow this step ,I'm sure your Desktop Boost Up Problem Resolved Easily, or if not to resolve tis issues you may call Dell Support Toll Free Number +1-888-763-7228 and get back instant result.

Dell is holding a huge 'Black Friday in July' sale right now

Now Dell is doing its own summertime sales extravaganza.

Not to be outdone by Amazon's Prime Day, which is basically Black Friday in July, Dell is running its own “Black Friday in July” sale that's happening at the same time. Dell’s Black Friday in July sale starts 2 July and runs until 23 July. Some discounts are live now, though additional "doorbusters" will go live throughout the sale. These are limited-time events you'll want to hop on immediately.

• Amazon Prime Day 2018 deals have already started
• US Prime Day deals start with amazing $100 off Echo Show

Dell is claiming to offer deep deals on technology, with over 40 percent off select consumer and gaming PCs, plus TVs, monitors, and more electronics and accessories. Check out some of the best bargains we've spotted - that are currently available - so far:

• Inspiron Desktop with 8th Gen Intel Core i5 for $499.99 (normally $679.99)
• Dell G3 17 for $749.99 (normally $849.99)
• Bose QuietComfort 25 noise-canceling headphones for $169 (normally $279)
• Logitech K480 Bluetooth keyboard for $29.99 (normally $49.99)

As for upcoming sales, here are a few we think you'll enjoy:

• Starts at 11am EST on 9 July:
  • Alienware Aurora for $1,199.99 (normally $1,699.99)
• Starts at 11am EST on 10 July:
  • Dell 27 gaming monitor for $399 with $100 gift card (normally $799.99)
• Starts at 11am EST on 10 July:
  • Ultimate Ears BoomM 2 Bluetooth speaker for $59.99 (normally $179.99)
• Starts at 11am EST on 12 July:
  • Alienware 15 for $1,399.99 (normally $2,149.99)
• Starts at 5pm EST on 13 July:
  • Dell G5 15 for $899.99 (normally $1,049.99)

Dell Technical support +1-888-763-7228

Are you facing Dell Printer Error code 016-799?

If yes, then you have landed on the right post because here in this post we have mentioned some of the causes and solutions of Dell Printer Error code 016-799. By following these steps you can resolve your Dell Printer Error Code 016-766 but if you are in a hurry and you want an instant help then get in touch with Dell Printer Support experts.

Cause of Dell Printer Error code 016-799

• If in case your papers are not inserted properly or there are some other issues with them.
• It can occur because of dual side printing.
• One of the cause can be when an invalid print parameter is included in the print data of the application.
• Sometimes the printer setup settings are mismatched and because of this the Error code starts coming on your computer screen.

How to Fix Dell Printer Error Code 016-799?

1. Turn OFF your printing machine first for 10 seconds and then turn it back ON.
2. Next, verify the size of paper whether it meets printer specification or not.
3. Now you have to set the paper size to auto mode in an operational panel. If you are unable to adjust the paper size then take experts advice by getting in touch with Dell Printer Support Executives.
4. After setting the size of the paper take a print page test and then again check if the error message still persists.
5. If Page is printing correctly then your issue is resolved and if not then there are some critical errors that may be affecting your printer so for the instant support contact the Dell Printer Support Experts.

If you have not to be able to fix error code 0334 ,you may consult our Experts and resolve this issues by remotely access.

Contact For : Dell Technical support Number +1-888-763-7228

How to Fix Dell Error Code 0334?

Dell Support Services  

Dell Error Code 2000-0334 normally occurs when a misconfigured system document creates a registry mistake inside your operating system. To Repair Dell Error Code 0334, you want to first find out what is causing this error.

Mostly a wrong registry occurs because of reasons like improper installation or uninstall or malicious Malware disease such as assault of harmful adware, spyware and viruses. Thus, the Dell Error Code 0334 needs to troubleshoot in the time to save your system from additional damages.

Steps To Repair Dell Error Code 0334 or 2000-0334:

Solution 1: Automatic approach to mend Dell Error Code 2000-0334 using Reg Cure Guru.

• Step 1: After installing the Program, click SCAN button.
• Step 2: As the Scanning is completed, click FIX ERRORS to troubleshoot the Error.
• If the Solution 1 does not operate in almost any case, our Dell Technical Support Services has listed yet another effective solution that will assist you resolve the Error Code 0334.

Solution Two: Run an Automatic Complete System Scan with Spy Hunter.

Spy Hunter is nowadays among the most recommended spyware removal tools available on the marketplace. It detects and deletes all kinds of Spyware, Viruses and Adware in the system while keeping it healthy.

• Step 1: Install the program on your system and start it by clicking “Malware Scan” to make a fast scan during your PC.
• Step 2: Following the scanning process, delete all of the threats by selecting all of the malicious files to eliminate the unauthenticated software.

If you have not to be able to fix error code 0334 ,you may consult our Experts and resolve this isssues by remotely access.

Contact For : Dell Technical support Number +1-888-673-7228

How to fix Dell PC error code 0146

• Run a full system scan
• Run Disk CheckUp
• Repair PC Registry
• Run PSA Diagnostics
• Reset BIOS Settings
• Run System Restore in safe mode
• Run your PC in Safe Mode and Clean Boot

Solution 1: Run a full system scan

A virus can corrupt the hard drive and trigger the error code 0146. Run a full system scan on your PC to remove every possible virus corruption. There are several third-party antivirus software around that you may use; however, you can use Windows’ built-in antivirus, Windows Defender. Here’s how to run a full system scan on Windows 10 Creators Update

Solution 2: Run Disk CheckUp

Another way of fixing the error problem is by running disk cleanup on your Windows PC. Disk Cleanup is a Windows utility program that reduces the number of unnecessary files on your hard disk to free up disk space.

It also removes temporary files, empties the Recycle Bin, and removes unwanted system files; which could be responsible for the error 0146 problem. 

Solution 3: Repair PC Registry

The simplest way to repair your Windows registry is to use a dedicated tool, such as CCleaner. Alternatively, you can also use Microsoft’s System File Checker to check for system file corruption.

The utility program verifies the integrity of all system files and repairs files with problems when possible. 

If you have not to be able to fix error code 0146 ,you may consult our Experts and resolve this isssues by remotely access.

Contact For : Dell Technical support Number +1-888-763-7228

How To Update Dell Drivers For Windows 10? Step-by-Step Guide

Having problems with Windows 10 in your Dell laptop or desktop? Are you experiencing the following dell windows 10 problems, than you need to update download & update your drivers.

• Computer will not boot to Windows 10
• General issues upgrading Dell devices to Windows 10
• Windows 10 Black Screen Problem for Dell Inspiron
• dell windows 10 compatibility issues

If your drivers are outdated, missing, or corrupted, then it is essential to update Dell drivers for Windows 10 after the upgradation of your system from earlier OS to windows 10 .

Are you facing any functionality issues while working on your dell system after you have upgraded your system? You may observe that after you have upgraded your system from Windows 8, 9 to Windows 10, the old drivers may not match the compatibility of the new OS version and thus not functioning properly and affecting your system performance.

 Windows 10 Drivers for Dell

Dell is a globally recognized brand which manufactures electronic appliances like personal computers, laptops, computer peripherals, cameras, printers etc. Although the dell desktops are known for their good performance, but still you may have faced the problem that the system becomes slow after you have upgraded your dell systems from Windows 7, Windows 8, Windows 9 to Windows 10.

In order to avoid these types of problems, you can either download the latest updates of drivers from the manufacturers official website or you can reinstall all the drivers. If you are not sure about the drivers to be updated, we recommend you to use Driver Restore, the Dell Device drivers utility program for different window versions. Using Driver Restore program can automate your driver update and ensure that the right driver is installed for your Windows 10 system.

Fix Dell Driver Problems & Issues

The most common drivers related issues faced by dell customers are – printer drivers are not working, sound drivers are missing, touchpad driver can’t be found etc. To fix all such problems, you need to download the latest versions of Dell drivers for Windows 10.

In fact, the best way to download and update Dell Drivers for Windows 10 is to visit the official Dell website and download directly from there. This way you are sure that you are getting all the latest updates available on your dell drivers for Windows 10. But do you really know how can you easily download dell drivers from there?

Before downloading the drives, it is required that you must know the right drivers as installation of wrong drivers may raise serious PC problems. Here is a four-step guide to quickly update the Dell drivers:

How to Know If the Dell Drivers Are Outdated?

In many cases, it’s even hard for us to tell whether the older versions of drivers is the actual matter with Dell devices that is causing problems. If you are facing any issues while operating the upgraded Windows 10  dell system, then the probability is that the drivers are outdated and you need to update them for the smooth function of your PC.

To identify if some driver is causing problems, you can manually check it with Device manager: go to Control Panel, select System and click on Device Manager. If there is an exclamation point inside a  yellow triangle beside the device, then you will need to download and install updated drivers.

If you wouldn't updated Dell Driver in Windows 10 , you may consult our expert to regarding this issue definitely, you may have a right decision, Consult Our Dell Technical Support Number +1-888-763-7228.